Colony Flow Level 541 Walkthrough Solution & Guides | How to solve Colony Flow 541

Welcome to Colony Flow Level 541. Today we are tackling a massive underwater pixel art puzzle that requires careful planning to beat. This level presents a giant anglerfish surrounded by dark blue water and blocked by thick chocolate pieces at the bottom. I am Liam Stone and I will walk you through exactly how to feed your colony and clear this board without getting stuck. You will need to manage your tray space perfectly to keep the ants moving at all times.

Colony Flow Level 541 Overview

What You Are Working With

The main pixel art picture on this board is a glowing anglerfish. The fish has a large cyan body with sharp white teeth and a bright yellow lure hanging from a stalk on its head. The entire fish is completely surrounded by a huge block of dark blue pixels representing the deep ocean water. There are also a few black pixels outlining the fish and some white pixels floating around as bubbles in the upper right area.

Your biggest immediate problem is the chocolate. There are two massive chocolate blocks sitting right at the bottom edge of the board. They cover the entry points to the bottom left and bottom right corners. These chocolate blocks each have a strength of 200 on them. You have to break through these thick layers before your ants can even touch the main pixel art picture.

Down in your tray you have a wide variety of colors waiting for you. You will see high numbered blocks of dark blue water and cyan fish scales. You also have black blocks for the outlines and white blocks for the teeth. Finally you have a single yellow block tucked away for the glowing lure. Your tray only has five waiting slots at the top. This limited space is the real challenge of the puzzle.

What It Takes to Clear Level 541 Board

To clear this level you need to carve a continuous path from the bottom of the board to the top. You absolutely must dismantle the chocolate barriers first. If you try to pull colors for the upper parts of the fish too early you will fail. The primary rule is that you lose if all five waiting slots fill up and no ants can reach the colors you pulled.

Winning requires you to patiently alternate between eating the dark blue background and chewing through the cyan fish body. You want to clear the level layer by layer starting from the bottom nest hole. You clear the board completely when every single pixel is eaten and the final yellow lure disappears.

Colony Flow Level 541 Step by Step Solution

Step 1: Break down the two massive chocolate barriers at the bottom of the board

When the level starts you see the two massive chocolate sections marked with a 200 count sitting right above the nest hole. Do not panic about these high numbers. You need to pull up your initial dark blue and black blocks into your open waiting slots to get the ants moving immediately. The colony will stream out of the nest and automatically attack the chocolate layers because they physically block the path to everything else on the board. Watch the numbers on the chocolate drop rapidly as the ants chew through the thick brown barriers. Keep feeding a mix of your dark blue blocks and your initial cyan blocks into the waiting slots as your early blocks empty out. You must maintain a continuous heavy swarm of ants to clear out that entire 200 count on both sides. Do not pull up too many different colors at once during this opening phase. Stick to the most abundant background colors so the ants can reach their target pixels immediately once the chocolate finally breaks away.

Step 2: Clear the lower dark blue background to expose the belly of the fish

Once the chocolate completely dissolves the ants finally have direct access to the bottom edge of the main picture. This bottom area is entirely made of dark blue water and a few black outlines defining the lower fins of the fish. Pull the high count dark blue blocks from your lower tray into your waiting slots. The ants will flood into the newly opened lower left and lower right corners and start working their way up the board. This massive lateral movement opens up a much wider path for your colony to reach the cyan belly of the anglerfish in the center. Always make sure at least one dark blue block is active in your slots during this phase so the ants do not stop their forward march. If you let the background sit untouched your vertical paths will become too narrow for the colony to flow efficiently toward the top.

Step 3: Deploy cyan blocks to start eating the lower half of the anglerfish body

With the bottom background cleared you can now see a wide open path directly to the cyan pixels forming the lower half of the fish. Bring up a large cyan block from your tray into an empty waiting slot. The ants will branch off from the background water and start devouring the light blue pixels of the belly and the tail fin. You want to clear the lower jaw area and the bottom fin first to create a large empty space right in the middle of the board. Mix in another dark blue block alongside the cyan ones to keep the background water shrinking at the exact same time. This dual targeting approach ensures your waiting slots constantly cycle and never jam up with unusable colors while you work through the heavy middle section.

Step 4: Work through the black outlines and push into the upper ocean water

As the lower half of the fish disappears the ants will hit the dense black pixel outlines that define the overall shape of the creature. Pull up a black block into your tray to clear these thick structural boundaries. Removing the black pixels opens up the inner sections of the fish and gives your ants access to the upper dark blue water on the far left side. Now bring up more dark blue blocks to chew away at the top left corner where the anglerfish lure stalk begins to curve upward. You have to be incredibly careful here to only pull colors that the ants can actually touch right now. If you pull the yellow block for the lure at this early moment you will trap it in a waiting slot indefinitely because those yellow pixels are still completely surrounded by cyan and blue.

Step 5: Target the white teeth and the floating bubble details

The mouth of the anglerfish is now completely exposed and the outer cyan lips are gone. This reveals the bright white pixels that make up the sharp jagged teeth inside the mouth. There are also a few white pixels floating as tiny bubbles in the upper right corner of the water. Pull your white block into an open waiting slot as soon as the path into the mouth is totally clear. Your colony will march straight into the open jaws and consume the teeth one by one. Clearing the teeth is a vital move because they physically block access to the very back of the mouth and the top half of the face. Keep a close eye on your remaining cyan blocks and pull one up to help finish off the top of the head while the teeth slowly disappear from the board.

Step 6: Finish the upper dark blue water and the remaining cyan head

The board is getting much smaller now and the end is clearly in sight. You only have the top border of dark blue water and the very upper section of the cyan fish left to handle. Fill two of your empty slots with your remaining dark blue blocks and fill one slot with a cyan block. The ants will naturally split into two groups and wrap around the top edges of the board to clean up the last of the deep ocean water. The other group will finish eating the top of the anglerfish head and the long cyan stalk that holds the glowing lure. Make sure you wait for these specific colors to completely clear before making any final moves to avoid a frustrating late game jam when you are so close to winning.

Step 7: Consume the yellow lure and the final black outlines to complete the level

Only the glowing yellow lure and a tiny handful of black outline pixels remain isolated on the board. The path to these final pieces is completely wide open from the bottom. Pull your final black block into the tray to remove the last outline piece sitting right near the lure. Then smoothly pull the small yellow block into your very last open slot. The remaining ants will rush up to the middle left side of the board and rapidly eat the yellow pixels. The entire picture completely vanishes and your colony finishes the board triumphantly. You have successfully managed your tray slots and conquered a very heavy puzzle.

Final Thought

This puzzle tests your patience with those massive chocolate barriers right at the start. You have to trust the process and let the ants do their work on the heavy blocks before you rush into the main picture. Always watch your paths and never pull a color unless you can trace a clear line from the nest to the pixels. Feel free to watch the video above this article if any step is hard to follow in text. Seeing the exact timing of the blocks can help you master the flow and clear the board with ease.